How To Get Tee Marks Off My Driver? [Try These 5 Methods]

Are you tired of seeing those unsightly tee marks on the face of your driver? Not only do they affect the aesthetic of your club, but they can also impact the performance of your shots.

Luckily, it’s easy to get rid of tee marks and keep your driver looking and performing at its best.

In this blog post, we’ll walk you through a few simple steps on how to get tee marks off your driver and keep them from coming back. So, grab your driver and let’s get started!

What Causes of tee marks on drivers?

Tee marks on drivers are usually caused by the driver coming into contact with the tee or golf ball when the swing is being made.

This can occur if the golfer is using the wrong size of tee for the driver, if the golfer is using a worn or damaged driver, or if the golfer is not using the correct swing technique.

In some cases, tee marks can also be caused by the driver being struck by another object, such as a rock or tree branch, during the swing. Let’s dig deeper-

Improper impact: Tee marks can be caused by striking the ball off-center or with too much of the club’s heel or toe. This can cause the clubface to twist or deform, resulting in marks on the head.
Poor quality or worn out golf balls: Using poor quality or worn out golf balls can cause abrasions on the clubface, resulting in tee marks.
Harder than normal driving range mats: Hitting off of driving range mats that are too hard or have a rough surface can cause marks on the clubface.

Improperly fitting clubhead covers: Using club head covers that are too small or do not fit properly can cause abrasions on the clubface when the cover is removed.
General wear and tear: Over time, even with proper use, a driver may accumulate marks and scratches on the clubface due to general wear and tear.

Different Ways To Remove Tee Marks From Golf Driver

There are a few different methods you can use to remove tee marks from your golf driver:

#1- Use a soft-bristled toothbrush

Wet the toothbrush and gently scrub the marks in a circular motion. This can help to loosen and remove any dirt or debris that may be stuck in the grooves of the clubface.

#2- Use a cleaning solution

You can purchase a specialized golf club cleaner or make your own by mixing water and mild dish soap.

Apply the solution to the marks and scrub with a soft cloth or toothbrush. Rinse the clubface thoroughly with water after cleaning.

#3- Use a pencil eraser

Gently rub the marks with a pencil eraser to loosen and remove them. Be careful not to apply too much pressure, as you don’t want to damage the clubface.

#4- Use a groove cleaner tool

These tools are specifically designed to clean the grooves of your golf clubs. They have small, pointed bristles that can help to easily remove dirt and debris from the grooves.

#5- Use a fine grit sandpaper

If the marks are particularly stubborn, you can try using a fine grit sandpaper to remove them.

Gently sand the marks in a circular motion, being careful not to apply too much pressure. Rinse the clubface thoroughly with water after sanding.

Note: Remember to always be gentle when cleaning your golf clubs to avoid damaging them. It’s also a good idea to refer to the manufacturer’s care instructions to ensure that you are using the appropriate cleaning methods for your specific clubs.

Why It’s Important For Golfers To Keep Their Drivers Clean And Free Of Tee Marks

There are a few reasons why it’s important for golfers to keep their drivers clean and free of tee marks:

Improved Performance

A clean driver can help improve a golfer’s performance because a dirty clubface can affect the trajectory and distance of the ball.

When a driver is covered in dirt or tee marks, it can create extra friction when the clubface makes contact with the ball, which can cause the ball to fly off course or not travel as far as it should.

Increased Durability

Keeping a driver clean can also help increase its durability. Dirt and grime can build up on the clubface and shaft over time, which can weaken the club and shorten its lifespan.

By regularly cleaning the driver, golfers can help ensure that their clubs last longer and remain in good condition.

Maintaining a Professional Appearance

In addition to the performance and durability benefits, keeping a driver clean also helps golfers maintain a professional appearance on the course.

Dirty or damaged clubs can be a distraction for other golfers and can make a golfer look unprofessional.

Tips for preventing future tee marks

To prevent future tee marks, or dents, on your driver clubhead, there are a few things you can do:

Be careful when setting the club down on the ground. Avoid setting it down on hard surfaces, as this can cause dents to form.
Use a head cover to protect the clubhead when it is not in use. This will help prevent accidental damage from occurring.
Store your clubs in a bag with padded compartments or a cover. This will help prevent the clubs from knocking against each other, which can cause dents.

Avoid hitting shots where the ball is sitting on a slope, as this can cause the club to twist at impact and potentially cause dents.
If you do notice a dent on your clubhead, you can try using a rubber mallet to gently tap the area around the dent to try to smooth it out. However, it’s important to be careful when doing this, as you don’t want to cause further damage to the club.

FAQs

We know you might have some questions about the process, so we’ve compiled a list of the most common ones we receive. So, let’s dive in and start tackling those questions!

Can I use household cleaners on my driver to remove tee marks?

While household cleaners can be effective at removing dirt and stains, they are not always safe to use on golf clubs.

Many household cleaners contain harsh chemicals that can damage the finish on your driver and make it more prone to rusting.

It is best to use a specialized golf club cleaner or a mild soap and water solution to avoid damaging your driver.

Is it safe to use a brush or scrubber to remove tee marks from my driver?

Using a brush or scrubber can be effective at removing dirt and stains from your driver, but it is important to be gentle to avoid damaging the club.

Use a soft-bristled brush or a non-abrasive scrubber and apply light pressure when scrubbing.

Avoid using wire brushes or any other abrasive tools, as these can scratch the surface of the driver.

What if the tee marks on my driver won’t come off?

If the tee marks on your driver are particularly stubborn and won’t come off with gentle cleaning, you may need to use a more aggressive method.

One option is to use a mixture of equal parts water and baking soda to create a paste.

Apply the paste to the marks and let it sit for a few minutes before scrubbing gently with a soft-bristled brush.

Be sure to rinse the driver thoroughly and dry it thoroughly afterwards to avoid rusting.

Is it okay to use a power washer to remove tee marks from my driver?

While a power washer can be effective at removing dirt and stains, it is not recommended for use on golf clubs.

The high pressure of the water can damage the finish on your driver and make it more prone to rusting.

It is best to use a gentle cleaning method, such as a specialized golf club cleaner or a mild soap and water solution, to avoid damaging your driver.

Can I use a toothbrush to scrub tee marks off my driver?

A toothbrush can be effective at scrubbing away dirt and stains from small, hard-to-reach areas on your driver.

However, it is important to use a soft-bristled toothbrush and apply light pressure to avoid damaging the club.

Avoid using a hard-bristled toothbrush or applying too much pressure, as this can scratch the surface of the driver.

Is it okay to use a towel or paper towel to remove tee marks from my driver?

A towel or paper towel can be effective at wiping away dirt and stains from your driver.

However, be sure to use a soft, lint-free towel to avoid leaving behind any fibers on the club.

It is also important to avoid using too much pressure when wiping, as this can damage the finish on your driver.

Can I use a hairdryer to dry my driver after cleaning it?

A hairdryer can be used to speed up the drying process after cleaning your driver.

However, be sure to use a low heat setting to avoid damaging the club. It is also important to hold the hairdryer at least a few inches away from the driver to avoid overheating the club.

Final Thoughts

Getting tee marks off your driver can be a frustrating task, but it is important to regularly clean your clubs in order to maintain their performance.

The methods outlined above – using a soft bristle brush, white vinegar, and baking soda – are effective ways to remove tee marks and keep your driver looking like new.

It is also a good idea to invest in a head cover to protect your clubs from damage when they are not in use.

With a little bit of elbow grease and the right cleaning tools, you can easily remove tee marks and keep your driver in top condition.